Nylon 6 Glass Reinforced Resin

Striplox Load testing results using 8 gauge/size 8 countersunk screws using sufficient embedment into surface- screw style is determined by the surface i.e. Timber screw, MDF screw, Particle Board screw, Metal screw etc.

Yes, by leaving in place the locking tabs (see product Mounting Guides for locking tab positions).

Note: if you remove the tab this does NOT alter the load capacities it simply means the object can be disassembled.

Yes & No, only if you have access to the connectors, you can find a small entrance between the 2 components using a screwdriver insert into space and flick up the tab allowing the components to slide open. If Striplox connectors are recessed in, then the only option you may have is to carefully use protection against the surface and using a rubber hammer carefully knock apart.

Note: YOU MAY CAUSE DAMAGE, and this is NOT Striplox responsibility

All Striplox Products are tested in Government approved laboratories load testing conducted on a number of different surfaces in a number of directions:

• Orthogonal
• Transverse Shear
• Longitudinal Shear

Striplox results are then given a % safety factor for final load capacities.

Note: All Load Capacities are a guide only and without warranty & subject to screw style and sufficient embedment.

Striplox products feature alignment notches in the Horizontal and vertical positions also they all have centreline positions (see Installation guides and Mounting Guides in Resources) also available in Accessories, Striplox have positioning jigs which can be found in products and also in resources – positioning jigs.

All recesses must be precise in depth and also length to allow enough space to slide open, the mini 60 and Mini 120 must be no more or no less than 7mm slot (Striplox provides a 7mm Straight Router).

Striplox is designed to be tight fitting with zero movement once fully engaged, all Striplox products have elongated screw positions to allow for a small amount of movement during lockup. Tolerance is +/- 0.05mm.

From the Striplox Home page, select Resources for PDF’s.

Yes, Striplox raw materials are UL94 rated (See resource documents).

Yes, temperature range is +/- 50° centigrade ensure you use correct out door screws (stainless etc).

Striplox products feature alignment notches in the Horizontal and vertical positions also they all have centreline positions (see Installation guides and Mounting Guides in Resources) also available in Accessories, Striplox have positioning jigs which can be found in products and also in resources – positioning jigs.

Reduces Labour Assembly Costs
Eliminating messy glues and dowel which can easily break off or blow out substrates if over tightened or in transportation

Invisible Connection
All Striplox can be surface mounted or recessed in multi directional positioning

Strong & Easy to Use
Limited tools required, simple 3 step assembly instructions, the design of the 2 components (male & female) interlocking in multiple angles creates unbelievable strength.

Permanent and Disassemble Easy Options
option to remove the locking tab simply using a screwdriver or small knife
1000’s of applications for each Striplox product –
Interior and exterior use

Accessory Range Available
To make your project easier we have a range of templates. Jigs and the correct router bits available (see product page)

Yes, all Striplox products can be surface mounted or semi recessed (recess only 1 component) or full recess mount in multiple directions we have available CNC files – DXF 2D solid works these can be found in resources.

Note: 3D information cannot be provided due to International patent protection.

Visit our distributor list on the home page or Contact your local Hardware distributor, you can also use the contact us section

Due to the raw material used in manufacturing Striplox and because we do not want glue to form a barrier inside the female component, you can ONLY use 1 glue/adhesive (Striplox Liquidlox – see accessories) it is a Cyanoacrylate Adhesive.

Yes, ensure sufficient screw embedment and recommended at least 1 of the components you leave in place the locking tab.

Ensure surface is clean before screwing into position, use a pilot whole for screw so it does change position, ensure screws are tight, ensure the edge by the centreline is flush and in position, use the mark-out template (see video in gallery – tips on right angle assembly).

Suggest you look at the video gallery for assembly instructions.

Yes, Striplox has a number of products for different applications for shelving. Visit the product page.

• Striplox Shelflox Expendable
• Striplox Megalox 241mm
• Striplox 5” Hidden Joiner – Mini 120
• Striplox No.20 Hidden Joiner – Mini 60

Yes, Striplox has a number of products for different applications for shelving. Visit the product page.

• Striplox Shelflox Expendable
• Striplox Universal Heavy-Duty Connector – Pro 55
• Striplox Multi-Purpose Joiner – Pro 23
• Striplox Multi-Purpose Connector – Clip 50

Yes, documents in the resource section.

No problem, don’t stress! I’m here to help with over 35 years’ experience in the industry and the Designer of the Striplox Range. Feel free to email me (in the first instance) your question or you can call – BUT be careful, please! My Phone number is in Australia Time - Please don’t wake be up!!!! She will get grumpy @#!